Model 1200

Tridak® Model 1200 Syringe Filling System

Syringe Filler’s Disposable Fluid Path Enables Precise Filling with Fast Material Changeover and No Cross Contamination


The Tridak Model 1200 syringe filler offers void-free, accurate, and consistent syringe filling. It is designed to fill dual-component syringe cartridges with either the same or different materials simultaneously. The systems can also be configured to fill small, single-component syringes. This is an ideal filling station for materials like epoxies or composite resins that require two-component mixing. The Model 1200 is also particularly useful for lower volume production or where frequent material change-out is required. A typical fill takes 2-6 seconds.

To operate the Model 1200 syringe filler, syringes are first placed in the fill nozzle. The system then locks the syringes in position. The grippers grab the plungers and begin to pull them up as the syringes are being filled. When the syringe filler has completed filling the syringes, the gripper releases the plungers and the operator removes the syringes.

Available System Packages

All systems include the Model 1200 filling system outfitted with two Model 828 dispensing valves (T17057), two precision air regulator (T16578), a fluid line kit made of 3/8″ OD, 1/4″ ID black polyethylene tubing, a footswitch, a selected reservoir, and an air line kit. See the table below for available reservoir packages.

With Cartridge Drop-In With Large Bottle Drop-In With Pail Drop-In
550 mL [20 oz] 946 mL [32 oz] Up to 1 Gallon Up to 5 Gallon Up to 15 Liter
Straight or Tapered


Operating Air Pressure:
60 psi (4.1 bar) min / 80 psi (5.5 bar) max

Electrical Power Required:
120 VAC, 50/60 Hz

Dimensions (W x H x D):
29.125 in x 24.125 in x 18.25 in (73.98 cm x 61.28 cm x 46.36 cm)

Compatible Viscosity Range:
1 – 60,000 cP 

System Features

  • Pneumatically fills dual-component syringes simultaneously with the same or separate materials
  • Built in electronic PLC controller
  • Dual pressurized cartridge reservoirs
  • Built-in purge system
  • Adjustable fill level, electronically controlled
  • Utilizes disposable fluid path valve technology which eliminates cross-contamination and minimizes clean-up and downtime during product changeover
You're viewing: Model 1200
Read more