Jet Dispensers

Spray valve for substrate coating, capable of controlling low to high viscosity liquids up to approximately 10,000mPa(s). It achieves a high-precision, non-contact spray application with reduced scattering and is compatible with VOC-free liquids like UV materials, silicone, and epoxy.

SV01S

Precision spray valve for applying high viscosity materials up to 30,000 mPa·s, such as silicon, UV adhesive, or grease. It is designed to provide a precise, optimized coating pattern without the splattering or overspraying common to these applications.

SV12

Diaphragm Valve

Mini-diaphragm valve designed for controlled, consistent coatings in applications where space is tight or limited. Its compact and lightweight design provides drip-free, shot-to-shot dispensing of UV-cure adhesives and other low-to-medium viscosity fluids.

SV35DA

Precision piston valve that provides accurate, consistent dispensing of medium to thick fluids like grease and silicone. It features adjustable fluid flow control and a positive shut-off mechanism that pulls back a slight amount of material to prevent mess or dripping.

SV35HF

High Pressure Spool Valve

High-flow piston valve designed for fast and accurate filling with low to high viscosity materials. It dispenses consistent, repeatable volumes and features a pull-back movement that provides a fast, clean cutoff, preventing dripping and drooling.

SV46

Pneumatic, balanced spool valve designed for the consistent dispensing of industrial sealants, silicones, and greases. It is engineered to apply a neat bead of material at high input pressures up to 17.2MPa.

SV47

High Pressure Spool Valve

High-pressure valve designed to stably discharge high-viscosity liquids like sealants and greases. It supports a maximum liquid pressure of 17.2MPa and features a simple, fixed-stroke structure for easy use and maintenance.

SV51

The SV51 is a low-maintenance needle valve for high-precision, micro-volume dispensing. It accurately dispenses volumes as small as 0.001cc and features adjustable flow control and a fast-response design to ensure a clean, drip-free cut-off with low-to-mid viscosity fluids.

SV51MD

Needle valve for stable, ultra-trace dispensing down to 1 microliter. Its advanced shut-off design, where the needle seals inside the tip, provides excellent liquid drainage and drip-free performance. The valve is capable of high-speed, stable application at 50Hz when paired with an SVEM solenoid valve.

SV59MD

High-speed microdot dispense valve designed for consistent, minimum volume dispensing. It can apply small to extremely minute dots, and ensures precise, drip-free operation when combined with an optional high-speed solenoid valve.

SV59MS

Spray valve designed for non-contact, ultra-fine, thin-film spray coating, even in narrow spaces. It uses a small diameter nozzle and features excellent liquid drainage properties to reduce scattering during application.

SV62

Diaphragm Valve

Compact, high-precision diaphragm valve for the drip-free dispensing of low to medium viscosity liquids. It uses an inert polymer resin that does not react with fluids, making it ideal for applying reactive materials like instant and anaerobic adhesives.

SV62B

Diaphragm Valve

High-precision diaphragm valve specifically designed for dispensing UV-curable adhesives. It features a black UHMW resin body with high light-shielding properties to prevent premature curing and ensures a fixed, drip-free application.

SV70

Conformal Coating Valve

Conformal coating valve designed to control high viscosity materials with less scattering. Its unique square carbide nozzle enables a wide range of coatings at low flow rates, providing a stable, high-precision coating pattern without mist or scattering.

SV91

Spray valve designed for consistent coating of low to medium viscosity fluids. It utilizes low volume, low pressure air to achieve high transfer efficiency without causing overspray or misting, allowing for perfectly controlled spray quality.

SV97MS

Precision micro spray valve that produces uniform, exact micro spray patterns as small as 3.0 mm. It uses low volume, low pressure air to ensure a consistent application with no overspray or mist. The valve features a positive, drip-free shut-off with no remaining dead fluid volume

Ideal for drip-free dispensing of low to medium viscosity fluids. The flexible diaphragm seal provides accurate and speedy shut-off movement that eliminates fluid leakage between cycles—perfect for precise applications with adhesives, coatings, and lubricants.

Perfect for consistent small amount applications with various adhesives, solvents, or other mid-to-high viscous fluids. The piston needle mechanism provides precise control for micro-dosing, delivering fast response times and tight shot-to-shot consistency.

SV51

SV51MD

SV59MD

Specialized for reliable shut-off with medium-to-high viscosity fluids like sealants. The piston valve mechanism delivers clean cut-off and material pull-back, preventing stringing while handling materials like thick greases, silicones, and industrial adhesives.

SV35DA

SV35HF